Electric heaters cause fire and leakage

The main cause of the fire in the electric heater is that the electric heater that is energized is placed on the combustible material or placed near the inflammable material, causing a fire under the long-time high-temperature baking; the electric heater is not installed with the plug, and the electric wire head is directly inserted. Inside the socket, the electric ball valve is easy to cause a short circuit and a fire occurs; the user does not remove the electric heater plug when leaving, the time is too long, causing the electric heater to overheat, igniting the adjacent combustible material and causing a fire; Continued use of the wire after repeated repairs can cause the line to be overloaded and cause a fire.

Electric heater leakage We need to consider whether there is a problem with flange welding or the quality of the electric heater itself and whether there is a problem with the magnesium oxide powder inside the electric heater. Electric heater leakage We need to do the work to check whether the high-temperature fan power supply is normal, whether the circuit has a short circuit, the ground wire is not connected. Check the insulation of the electric heater for damage and repair or replace it in time. Check if the electric heater is burnt out. When using the electric heater, the inflammable and explosive materials should not be placed near the electric heater, and a certain safe distance must be maintained; the explosion-proof electric heater must be placed on the non-combustible non-combustible material base; the safety of the explosion-proof electric heater wire The intercept flow must meet the capacity requirements of the explosion-proof electric heater; the industrial electric heater must be equipped with a separate circuit under any circumstances; the wire must be installed with a plug, and the wire end cannot be directly inserted into the socket.